The Evaluation Board for ARM from Hitex has everything on-Board to develop your first ARM project:

• Philips LPC2148 FBD64 Microcontroller with:
  - 32 kByte On-chip SRAM
  - 512 kByte On-chip FLASH
  - Vectored Interrupt Controller
  - GPIO Interface with up to 46 Lines
  - Two 32-bit Timer
  - 6-channel PWM unit
  - Two UART interfaces
  - Two I²C interface
  - SPI and SSP interface
  - USB 2.0 full speed device interface
  - 10-bit DA converter
  - Two 7-channel 10-bit AD converter
  - Programmable Watchdog Timer
  - Real Time Clock
  - Fully Static Operation up to 60MHz
• 12MHz Quarz
• Serial Port Driver for 2 UART Ports
• USB 2.0 full speed device port
• On-board loudspeaker
• SD card reader
• 8 LED’s (user programmable)
• IRQ button
• Reset button
• Power Regulators
• Wire-Wrap pins for Port P0 and P1 (47 port signals)
• Free Wire-Wrap area with 96 pins
• JTAG Connector
• ETM Trace connector (Mictor connector - not mounted)